The Mido Ocean Star Decompression Worldtimer is an irresistible neo-vintage style piece with bright colours and cutting-edge technologyr revives the diving spirit of the 1960s while transporting watch connoisseurs towards new horizons. Created in the 1960s, the innovative Ocean Star Skin Diver Watch used a multicoloured scale to display decompression times. Today, the Ocean Star Decompression Worldtimer retains this vintage charm. The original decompression plate, the applied and polished original Mido logo, the bright colors, the sapphire crystal in a "glassbox" shape that is reminiscent of the plexiglas used at that time - are all elements inspired by a legendary timepiece. The colorful face of the Ocean Star Decompression Worldtimer pays tribute to the model created by Mido in 1961 and its innovative decompression scale function. The dial is dressed in the bright colours of the original model's table - an aesthetic nod to the legendary piece that is in no way intended to replace modern diving instruments. Depths are indicated at 12 o'clock: in meters (left) and in feet (right). Each coloured ring is assigned a scale - 25m (80 feet), 30m (95 feet), 35m (110 feet) and 40m (130 feet). The number corresponds to the depth at which the circle should be viewed by the diver. For example, at a depth of 25 to 29 meters, the first circle (yellow) should be consulted. In addition, each circle has a number 0 on it, the location of which varies from ring to ring. On the yellow circle, 0 is located near the 34th minute division of the dial, which means that at a maximum depth of 25 to 29 meters, the diver can remain at that depth for 34 minutes without needing to make a decompression stop during ascent. The Mido Ocean Star Decompression Worldtimer is equipped with a GMT function and a world time bezel to take you to new heights. A red arrow indicates the time of travel - in contrast to the flat diamond hour, minute and second hands. The rotating bezel, equipped with an aluminum ring, is marked in silver with the world's major cities. This will revive the diver's spirit of the 1960s to surf the frontiers, jet lag proof and deep underwater. Mido designed the Ocean Star Decompression Worldtimer to withstand any conditions and to do it with flair. The screw-down case back and crown contribute to its water resistance of up to 200 metres and protect the calibre 80 from water damage. The extreme reliability of this Swiss automatic movement, counts on a generous power reserve of up to 80 hours and a Nivachron™ balance-spring – providing exceptional resistance to magnetism and shock, which makes it particularly durable. With its included additional strap, the Mido Ocean Star Decompression Worldtimer watch offers wrists a variation in style. Versatile and adding a sporty touch, the first is in textured navy blue or black rubber. An ingenious system allows you to change it at the click of a button for a second, more retro-style Milanese mesh strap. NOTE: For this brand, RAW only ships to a local address in Singapore. RAW reserves the right to refuse orders from countries outside of Singapore. Technical Specifications Case size: 40.5mm Case material: 316L stainless steel  Case back: 316L stainless steel  Movement type: Automatic Movement no.: Mido Caliber 80 based on ETA C07.661 Power reserve: Approx 80hrs Dial: Blue or black with decompression table Glass: Sapphire Water resistance: 20ATM Strap type: Rubber and stainless steel Strap material: Blue or black rubber and Milanese-style stainless steel bracelet Buckle: Stainless steel tang buckle Warranty: 2 years

Read more less

Mido pays tribute to the Ocean Star collection. In subtle reference to the past, the Mido Ocean Star Tribute Swiss watch reinterprets the aesthetic codes of the diving models from the 1960s. It is fitted with the Caliber 80 automatic movement with up to 80 hours of power reserve, is water-resistant up to a pressure of 20ATM (200m/656ft) and features a unique strap offering maximum comfort. The Caliber 80 from Mido is a next-generation automatic watch movement which offers up to 80 hours of power reserve, twice as much as a regular calibre.  Mido exclusively uses high-grade 316L stainless steel for its steel components to ensure complete and continued compatibility with the skin. This material resists corrosion, is unaffected by magnetic fields and demonstrates excellent durability, making Mido's stainless steel watches enduring creations that can stand the test of time and weather the elements. The metal’s many technical properties are complemented by its sleek, extremely pleasing aesthetics, enabling a wide range of uses. Mido's sapphire crystal glass reveals its spectacular dials in sharp relief. They afford excellent readability in a range of conditions while perfectly complementing the watches' elegant design. Strong and shock-resistant, they are made to last, maintaining their exceptional transparency for many years. NOTE: For this brand, RAW only ships to a local address in Singapore. RAW reserves the right to refuse orders from countries outside of Singapore. Technical Specifications Case size: 40.5mm Case material: 316L stainless steel  Case back: 316L stainless steel  Movement type: Automatic Movement no.: Mido Caliber 80 based on ETA C07.661 Power reserve: Approx 80hrs Dial: Green dial with applied indices Glass: Sapphire Water resistance: 20ATM Strap type: Fabric strap Strap material: Green fabric Buckle: Stainless steel tang buckle Warranty: 2 years

Read more less

Mido pays tribute to the Ocean Star collection. In subtle reference to the past, the Mido Ocean Star Tribute Swiss watch reinterprets the aesthetic codes of the diving models from the 1960s. It is fitted with the Caliber 80 automatic movement with up to 80 hours of power reserve, is water-resistant up to a pressure of 20ATM (200m/656ft) and features a unique strap offering maximum comfort. The Caliber 80 from Mido is a next-generation automatic watch movement which offers up to 80 hours of power reserve, twice as much as a regular calibre.  Mido exclusively uses high-grade 316L stainless steel for its steel components to ensure complete and continued compatibility with the skin. This material resists corrosion, is unaffected by magnetic fields and demonstrates excellent durability, making Mido's stainless steel watches enduring creations that can stand the test of time and weather the elements. The metal’s many technical properties are complemented by its sleek, extremely pleasing aesthetics, enabling a wide range of uses. Mido's sapphire crystal glass reveals its spectacular dials in sharp relief. They afford excellent readability in a range of conditions while perfectly complementing the watches' elegant design. Strong and shock-resistant, they are made to last, maintaining their exceptional transparency for many years. NOTE: For this brand, RAW only ships to a local address in Singapore. RAW reserves the right to refuse orders from countries outside of Singapore. Technical Specifications Case size: 40.5mm Case material: 316L stainless steel  Case back: 316L stainless steel  Movement type: Automatic Movement no.: Mido Caliber 80 based on ETA C07.661 Power reserve: Approx 80hrs Dial: Gradient red dial with applied indices Glass: Sapphire Water resistance: 20ATM Strap type: Rubber  Strap material: Black rubber Buckle: Stainless steel tang buckle Warranty: 2 years

Read more less

A distillation of technology inside an extraordinary Swiss diving watch, the Mido Ocean Star 600 Chronometer is designed for exploring the ocean's depths. Water-resistant up to 60ATM (600 m / 1,968 ft), this exceptional timepiece is perfectly suited to the specific conditions of deep water: its bezel, decorated of a ceramic ring, is filled with SuperLuminova® Grade X. The Mido Ocean Star 600 Chronometer is also fitted with a helium valve and a COSC-certified chronometer movement with a silicon balance spring, and offers an autonomy of up to 80 hours. The "Chronometer" certification guarantees the high accuracy of a watch or a movement.The tests run by the COSC include the verification of the engraved number on the watch movement and controls in a testing environment. Each movement is individually tested following a strict procedure that lasts several days in five positions and at different temperatures (8°C, 23°C and 38°C). Over 15 days, the movements go though daily controls. Every day - including Saturday and Sunday - the instruments are measured and wound. If it meets the standards, the movement is "Chronometer" certified. Mido exclusively uses high-grade 316L stainless steel for its steel components to ensure complete and continued compatibility with the skin. This material resists corrosion, is unaffected by magnetic fields and demonstrates excellent durability, making Mido's stainless steel watches enduring creations that can stand the test of time and weather the elements. The metal’s many technical properties are complemented by its sleek, extremely pleasing aesthetics, enabling a wide range of uses. Ceramic is a non-metallic mineral material that undergoes a specific treatment in a high-temperature environment. Many types of ceramics exist, each with their own unique properties suited to a variety of applications, from medicine to watchmaking. Ceramic is time-resistant, hypoallergenic and resistant to high temperatures, friction and abrasion. High-tech ceramics combine timeless elegance with distinct sophistication, belying their practically unmatched solidity. With the use of this material usually reserved for luxury watchmaking, Mido confirms its constant desire to offer cutting-edge technology, the very best materials, and high-end finishes without forsaking the value of its watches. Mido's sapphire crystal glass reveals its spectacular dials in sharp relief. They afford excellent readability in a range of conditions while perfectly complementing the watches' elegant design. Strong and shock-resistant, they are made to last, maintaining their exceptional transparency for many years. NOTE: For this brand, RAW only ships to a local address in Singapore. RAW reserves the right to refuse orders from countries outside of Singapore. Technical Specifications Case size: 43.5mm Case material: 316L stainless steel, ceramic bezel Case back: 316L stainless steel  Movement type: Automatic Movement no.: Mido Caliber 80 based on ETA  Power reserve: Approx 80hrs Dial: Blue with applied indices Glass: Sapphire Water resistance: 60ATM Strap type: Bracelet Strap material: Stainless steel Buckle: Deployant buckle Warranty: 5 years

Read more less

The Mido Ocean Star Decompression Worldtimer is an irresistible neo-vintage style piece with bright colours and cutting-edge technologyr revives the diving spirit of the 1960s while transporting watch connoisseurs towards new horizons. Created in the 1960s, the innovative Ocean Star Skin Diver Watch used a multicoloured scale to display decompression times. Today, the Ocean Star Decompression Worldtimer retains this vintage charm. The original decompression plate, the applied and polished original Mido logo, the bright colors, the sapphire crystal in a "glassbox" shape that is reminiscent of the plexiglas used at that time - are all elements inspired by a legendary timepiece. The colorful face of the Ocean Star Decompression Worldtimer pays tribute to the model created by Mido in 1961 and its innovative decompression scale function. The dial is dressed in the bright colours of the original model's table - an aesthetic nod to the legendary piece that is in no way intended to replace modern diving instruments. Depths are indicated at 12 o'clock: in meters (left) and in feet (right). Each coloured ring is assigned a scale - 25m (80 feet), 30m (95 feet), 35m (110 feet) and 40m (130 feet). The number corresponds to the depth at which the circle should be viewed by the diver. For example, at a depth of 25 to 29 meters, the first circle (yellow) should be consulted. In addition, each circle has a number 0 on it, the location of which varies from ring to ring. On the yellow circle, 0 is located near the 34th minute division of the dial, which means that at a maximum depth of 25 to 29 meters, the diver can remain at that depth for 34 minutes without needing to make a decompression stop during ascent. The Mido Ocean Star Decompression Worldtimer is equipped with a GMT function and a world time bezel to take you to new heights. A red arrow indicates the time of travel - in contrast to the flat diamond hour, minute and second hands. The rotating bezel, equipped with an aluminum ring, is marked in silver with the world's major cities. This will revive the diver's spirit of the 1960s to surf the frontiers, jet lag proof and deep underwater. Mido designed the Ocean Star Decompression Worldtimer to withstand any conditions and to do it with flair. The screw-down case back and crown contribute to its water resistance of up to 200 metres and protect the calibre 80 from water damage. The extreme reliability of this Swiss automatic movement, counts on a generous power reserve of up to 80 hours and a Nivachron™ balance-spring – providing exceptional resistance to magnetism and shock, which makes it particularly durable. With its included additional strap, the Mido Ocean Star Decompression Worldtimer watch offers wrists a variation in style. Versatile and adding a sporty touch, the first is in textured navy blue or black rubber. An ingenious system allows you to change it at the click of a button for a second, more retro-style Milanese mesh strap. NOTE: For this brand, RAW only ships to a local address in Singapore. RAW reserves the right to refuse orders from countries outside of Singapore. Technical Specifications Case size: 40.5mm Case material: 316L stainless steel  Case back: 316L stainless steel  Movement type: Automatic Movement no.: Mido Caliber 80 based on ETA C07.661 Power reserve: Approx 80hrs Dial: Blue or black with decompression table Glass: Sapphire Water resistance: 20ATM Strap type: Rubber and stainless steel Strap material: Blue or black rubber and Milanese-style stainless steel bracelet Buckle: Stainless steel tang buckle Warranty: 2 years

Read more less

Robust, versatile, and luminous in the dark: a scorpion has the qualities it needs to thrive in many different environments. The same applies to the Laco Amazonas, which is also suitable for a wide range of applications. That's why the watch also features appropriate markings as a special highlight: a relief design in the form of a scorpion. The four timekeepers of the Laco Amazonas collection share the same black dial with white arabic numerals as well as the shape of their casing. Depending on the model they differ in their visual colour accents, with the black, unidirectional bezel, the indices and the minute hand being coated in luminous Superluminova paint in white, green, blue, or orange. The long-lasting afterglow effect ensures optimal readability in low lighting conditions or even complete darkness. This is another aspect where the scorpion analogy is appropriate: the scorpion produces fluorescent materials that make it visible at night under UV lighting. With its solid exoskeleton, the scorpion is also exceptionally tough and strong for its small size. This is another characteristic that applies to this squad watch. The 42mm diameter Laco Amazonas model also resists external influences. This is assured thanks to the solid stainless steel case, and the fact that both the caseback and the crown are screwed into place. The double domed sapphire crystal is scratch-resistant. Its internal anti-reflective coating means that reflections are reduced, with improved transparency. The watch is also waterproof to 30 atmospheres and, to ensure that the watch can be used to the full in the water, different models are available, with a choice of a black rubber or stainless steel strap. The "Scorpion" combines practical functionality with sophisticated looks. It fulfils its potential in a variety of different settings. From the mountains to the desert or tropical rainforests, this flexible sports watch is ready for daily use in outdoor environments. The names of the four models reflect its purpose, namely Himalaya, Amazonas, Atlantik and Mojave. Technical Specifications Case size: 42mm Case material: Stainless steel case, screwed down crown with crown guard; unidirectional rotating ceramic bezel Case back: Solid stainless steel caseback with scorpion relief engraving Movement type: Automatic Movement no.:  Laco 200 based on Sellita SW200 Power reserve: Approx 38hrs Dial: Black matte dial with numerals and indices coated in SuperLuminova C3; white minue track; hour hand filled with luminous material SuperLuminova C3; minute hand filled with SuperLuminova green; second hand white and filled with SuperLuminova green Glass: Double-domed sapphire crystal with anti-reflective coating  Water resistance: 30ATM Strap type: Strap Strap material: Black rubber Buckle: Tang buckle Warranty: 2 years

Read more less

The Laco Seven Seas is part of the brand's Squad Watches collection and was developed in close collaboration with the German army for particularly high requirements. It impresses not only with a screw-down crown including flank protection at the 10 o'clock position and magnetic field protection; the additional helium valve also makes the model suitable for use up to 100ATM. The matte case with unidirectional rotating bezel is black PVD coated. Two different Superluminova luminous materials have been used for the hour and minute hands, ensuring quick and easy readability. The clear dial with indexes, Arabic numerals and date at 3 o'clock, give the Laco Seven Seas its unmistakable face. The sapphire crystal is double domed with an anti-reflective coating on the inside. A solid, particularly high-quality natural rubber strap with screwed buckle is firmly connected to the case by likewise screwed spring bars. With a total weight of 175g and a diameter of almost 46mm, the Laco Seven Seas is perfect for those looking for a robust watch with wrist presence. This Laco is packed in a sturdy water- and dust-proof plastic case. Technical Specifications Case size: 45.8mm Case material: Matte stainless steel case with black PVD coating with turnable bezel; helium valve, antimagnetic, protected screw crown at position 9H/10H Case back: Matte stainless steel caseback with black PVD coating Movement type: Automatic Movement no.:  Sellita SW200 Power reserve: Approx 38hrs Dial: Black matte dial with raised Superluminova indexes and Arabic numbers C3, white minute track; hour hand Superluminova C3, minute hand Superluminova orange, second hand white with Superluminova C3; date window Glass: Double-domed sapphire crystal with anti-reflective coating  Water resistance: 100ATM Strap type: Rubber Strap material: Black rubber Buckle: Tang buckle Warranty: 2 years

Read more less

When development work began for the Laco Atacama 2 watch, high quality standards and requirements had to be met - for the toughest conditions. A 100% reliable thoroughbred mechanical watch "Made in Germany" resulted from work partly carried out in close cooperation with the German Army and special units. The Laco Atacama is especially made to suit those in the emergency forces, police, military and those who love outdoor activities. In order to give the watch the necessary strength, the sensitive screwed crown has been integrated in an innovative way into the watch strap at the 12 o´clock position. The double joint between the case and strap makes this possible. Due to this, the watch fits snugly onto the wrist, and increases wearer comfort. In addition, the screw-down crown ensures water resistance of up to 50ATM. The Laco 200 automatic movement, based on the Swiss calibre Sellita SW200, functions perfectly even in the trickiest situations. In contrast to other types of watch fitted with a rotating bezel, the rotatable ring has a countdown function, counting down backwards anti-clockwise. This is particularly useful when coordinating joint deployments. Hard sapphire crystal on the front and back protects the interior of the watch. Hands, numbers and indexes are coated with luminescent Superluminova, rendering them easily legible during twilight and at night. In addition, the screw-down crown ensures water resistance of up to 50ATM. The Laco Atacama 2, part of the brand's range of Squad Watches, is suited for robust daily use in the toughest conditions - and has a simple, yet distinct design. Technical Specifications Case size: 46.25mm Case material: Stainless steel with black PVD coating Case back: Exhibition caseback with sapphire crystal Movement type: Automatic Movement no.:  Sellita SW200 Power reserve: Approx 38hrs Dial: Black matte dial with SuperLuminova C3-coated hands, numerals and indices; white minute track; hour hand filled with luminous material Superluminova C3, minute hand filled with Superluminova orange, second hand white and filled with Superluminova orange Glass: Flat sapphire crystal with anti-reflective coating  Water resistance: 50ATM Strap type: Rubber Strap material: Black rubber Buckle: Tang buckle Warranty: 2 years

Read more less

The Delma Shell Star Titanium is an exciting evolution of the signature collection which demonstrates the power of embracing professional insights, new technology and materials. The Shell Star Titanium is lightweight, robust and conspicuous, making it ideally suited for free diving and recreational pursuits. When Delma first introduced the Shell Star in 1975, it was the brand’s first professional divers’ watch. Nearly 50 years later, the Shell Star collection represents Delma's dedication to excellence and innovation in Swiss Made divers’ watches. Weighing in at only 136g, the strength and durability of the Delma Shell Star Titanium are elevated, thanks to titanium’s natural tenacity and corrosion resistance. Coupled with compact proportions for a divers’ watch at 41mm in diameter and just 13.6mm thick, it is exceptionally comfortable and enjoyable to wear. In order to reduce the size significantly, but remain undeniably a Shell Star, each feature was carefully analysed and reconfigured for design and clarity. Two types of lume - bright blue glowing SuperLumiNova BGW9 to accentuate the bezel, and neon green glowing SuperLumiNova C3 for the indexes and hands - were chosen for outstanding legibility. The Shell Star’s signature spade seconds hand is streamlined to draw attention to the subtly enlarged luminous pointer. The black scratch resistant ceramic bezel brings an additional element of durability and creates a dramatic visual effect in combination with the sand textured dials. The colours of the signature railway track, date window and accents were purposefully considered for each variation of the well-appointed model. Despite the smaller proportions, the Delma Shell Star Titanium upholds the power of the Shell Star inside and out. With water resistance to 50ATM, the titanium case back is sealed with a transparent portal revealing the automatic movement and Delma customized rotor in this impressive professional diver’s watch. The case and coordinating bracelet are subtly brushed to accentuate the metal’s distinctive warm grey tone. As Delma's divers’ watch collection has expanded and evolved over time, the brand's engagement with its community has contributed invaluable insights. Free diver, Ocean Conservationist and Delma ambassador, Magnus Lundborg, brings the value of a smaller, lighter weight watch into perspective. “When freediving in cold and dark waters, timing is everything. Diving with the Delma Shell Star Titanium has been a true joy. Not only is it lightweight, it is exceptionally easy to see in the murky waters of the North Atlantic. Free from the weight of a scuba tank but limited to the time of a breath, the Delma Shell Star Titanium has quickly become a natural and important part of my diving gear.” ~ Magnus Lundborg Understanding what is important in divers‘ timepieces from those who pursue the sport to the extreme continuously motivates Delma and informs the brand's innovations. The Delma Shell Star Titanium elevates a collection synonymous with Delma's dive watch expertise with an uplifting twist. The Delma Shell Star Titanium is limited to 499 pieces. Technical Specifications Limited edition: Only 499 pieces available worldwide Case size: 41mm Case material: Titanium Case back: Titanium with see-through mineral crystal Movement type: Automatic Movement no.:  Sellita SW200 Power reserve: Approx 38hrs Dial: Blue with SuperLuminova lumed hands and indices; black ceramic unidirectional bezel with lumed markers Glass: Sapphire crystal with anti-reflective coating Water resistance: 50ATM Strap type: Bracelet Strap material: Titanium Buckle: Deployant clasp  Warranty: 2 years

Read more less

Delma’s Blue Sharks have continuously exceeded expectations of resilience and the third generation is no exception. Standing out as one of the strongest divers’ watches ever produced, the new Delma Blue Shark III is the brand's supreme divers’ watch.  Launched in celebration of Delma's 95th anniversary and 50 years since the release of the brand's first professional divers’ watch, the Delma Blue Shark III has water resistance to an exceptional 4,000 metres. Since the first edition, the distinctive Blue Shark collection has stood out as a reference in the category for exceptional strength and the third edition pushes boundaries to the extreme.  The Delma Blue Shark III is fitted with essential components to make it the ultimate dive watch. A helium valve at 9 o’clock gradually releases trapped gas while preserving the water tightness of the watch. The easy to read orange dial with bold numerals, indexes and hands with SuperLumiNova enables clear legibility in the depths of the sea. The sturdy, black DLC unidirectional bezel offers accurate and safe measurement of the elapsed dive time and is easy to handle even with dive gloves. The custom crown protection safeguards the screw-down crown to ensure ultimate water tightness.  With vigorous strength and practical proportions, the 47mm diameter x 18.5mm high case is not only a state-of-the-art instrument but a functional timepiece for everyday life. Security screws and bespoke tools enable easy and reliable adjustment of the interchangeable solid stainless-steel bracelet and genuine rubber strap. The Blue Shark III is furnished in a customized wooden box, ready for the next adventure. Technical Specifications Limited edition: Only 500 pieces available worldwide Case size: 47mm Case material: Stainless steel Case back: Stainless steel with unique Blue Shark engraving Movement type: Automatic Movement no.:  Sellita SW200 Power reserve: Approx 38hrs Dial: Orange with SuperLuminova lumed hands and indices; black DLC unidirectional bezel Glass: Sapphire crystal with anti-reflective coating Water resistance: 400ATM Strap type: Bracelet and strap Strap material: Stainless steel bracelet and black rubber strap Buckle: Deployant clasp for the bracelet; tang buckle for the rubber strap Warranty: 2 years

Read more less

Built to accompany its wearer on the toughest regatta races, this is Boldr's first ever yachting chronograph watch, and like all Odysseys, the Boldr Regatta is a beast on your wrist. Combining modern and classic elements meticulously designed for performance and durability, this stainless steel sailor features a 10-minute count back disk-dial. At its heart lies an ETA Valjoux 7750 Chronograph Movement for seamless timekeeping while skimming the waves or exploring 500m under the surface. The dial is classic black and white with stylised boat-shaped skeleton hands to maintain the highest possible legibility. It also boasts a unique 2-in-1 bi-directional bezel function that pairs a 15-minute marker option with a specialised nautical miles tachymeter. Technical Specifications Limited edition: Only 100 pieces available worldwide Case size: 45.5mm Case material: 316L stainless steel Case back: Single-piece screw-down case back with embossed limited edition artwork Movement type: Automatic Movement no.: Swiss-made ETA Valjoux 7750 Elaboré grade Power reserve: Approx 48hrs Dial: Fine ombre texture finishing; boat-shaped hands with Swiss Super-Luminova; helium escape valve Bezel: 60 clicks bi-directional ceramic bezel with Swiss Super-Luminova Glass: Double-dome sapphire crystal with triple-coated inner side AR-coating Water resistance: 50ATM Strap type: Bracelet Strap material: Stainless steel; integrated quick-release bracelet with 6 micro-adjustments Buckle: Stainless steel deployant buckle Warranty: 1 year

Read more less

An all-round adventure companion, the Boldr Odyssey Freediver GMT is the brand's first ‘true’ GMT dive watch with an elegant, slim profile, thanks to its compact Miyota 9075 hi-beat movement (28,800 bph). The unidirectional ceramic bezel is dual-tone and graduated for 24 hours. Smoothly click it into place while the arrow-tipped GMT hand monitors home time, tracking up to three time zones simultaneously. The Boldr Odyssey Freediver GMT sees the inclusion of a new gradient dial, with the colour getting lighter in tone towards its translucent center while offering a glimpse of the movement ticking inside. Furnished with instantly recognizable polished angular lugs and a satin-finished case, this GMT diver is a breeze to maneuver by ‘jumping’ the hour hand to local time, without affecting the GMT and minute hands. The date will also correct itself either forward or in retrograde without missing a beat. Convenient.  With so little time and so much to see, strap on the Boldr Odyssey Freediver GMT and travel worry-free. Technical Specifications Case size: 44mm Case material: 316L stainless steel Case back: Sapphire with printed artwork Movement type: Automatic Movement no.: Miyota 9075 Power reserve: Approx 42hrs Dial: Multi-layered with ombre dial and translucent centre Bezel: Ceramic unidirectional bezel, 120 clicks; chocolate/black colour Glass: Domed sapphire crystal with anti-reflective coating Water resistance: 30ATM Strap type: Bracelet Strap material: Stainless steel Buckle: Stainless steel deployant buckle Warranty: 1 year

Read more less